<-PANalyzr Thermal Test Download
PANalyzr Thermal Test Instructions
This script can be used to troubleshoot and test PANalyzr fan operation.
Download the software here: https://drive.google.com/drive/folders/1HhghXdwY13h-cXIGHCf7MrYqcHb3jiol?usp=sharing
Make sure PANalzyr software is not running, and device is plugged in
- Run the application
2. Once the FPGA temperature exceeds 56 degrees, the fan should come on.
Note: from a cold start this should take about 7-8 minutes to reach the temp.
If the fan does not operate as expected the hardware will need to be returned to Spanalytics for evaluation / repair.